Aqueous-phase synthesis of PAA in PVDF membrane pores for nanoparticle synthesis and dichlorobiphenyl degradation

This paper deals with bimetallic (Fe/Pd) nanoparticle synthesis inside the membrane pores and application for catalytic dechlorination of toxic organic compounds form aqueous streams. Membranes have been used as platforms for nanoparticle synthesis in order to reduce the agglomeration, encountered in solution phase synthesis which leads to a dramatic loss of reactivity. The membrane support, polyvinylidene fluoride (PVDF) was modified by in situ polymerization of acrylic acid in aqueous phase. Subsequent steps included ion exchange with Fe²⁺, reduction to Fe⁰ with sodium borohydride and Pd deposition. Various techniques, such as STEM, EDX, FTIR and permeability measurements, were used for membrane characterization and showed that bimetallic (Fe/Pd) nanoparticles with an average size of 20–30 nm have been incorporated inside of the PAA-coated membrane pores. The Fe/Pd-modified membranes showed a high reactivity toward a model compound, 2,2′-dichlorobiphenyl and a strong dependence of degradation on Pd (hydrogenation catalyst) content. The use of convective flow substantially reduces the degradation time: 43% conversion of dichlorobiphenyl to biphenyl can be achieved in less than 40 s residence time. Another important aspect is the ability to regenerate and reuse the Fe/Pd bimetallic systems by washing with a solution of sodium borohydride, because the iron becomes inactivated (corroded) as the dechlorination reaction proceeds.     

From Adlayer Islands to Surface Alloy: Structural and Chemical Changes on Bimetallic PtRu/Ru(0001) Surfaces

The correlation between structural and chemical properties of bimetallic PtRu/Ru(0001) model catalysts and their modification upon stepwise annealing of a submonolayer Pt‐covered Ru(0001) surface up to the formation of an equilibrated Pt_xRu_1?x/Ru(0001) monolayer surface alloy was investigated by scanning tunneling microscopy and by the adsorption of CO and D₂ probe molecules. Both temperature‐programmed desorption and IR measurements demonstrate the influence of the surface structure on the adsorption properties of the bimetallic surface, which can be explained by changes of the composition of the adsorption ensembles (ensemble effects) for D adsorption and by changes in the electronic interaction (ligand effects, strain effects) of the metallic constituents for CO and D adsorption upon alloy formation.     

Pt(111) 表面上表层 Fe (FeO) 结构和次表层 Fe 结构的可控转变

 利用扫描隧道显微镜 (STM) 和 X 射线光电子能谱 (XPS) 对 Pt(111) 表面制备的 Fe 单层薄膜及其在不同环境气氛条件下的多种结构进行了研究. 在温度为 487 K 的 Pt(111) 表面制备出了完整的 Fe 单层薄膜Fe/Pt(111). 对 Fe/Pt(111) 依次升高温度进行超高真空退火, STM 和 XPS 结果表明退火温度高于 800 K 时, 表面 Fe 原子扩散到次表层区域, 形成次表层 Fe 结构Pt/Fe/Pt(111). Pt/Fe/Pt(111) 在 O2 氧化气氛中经 850 K 退火可转变成表面 FeO 薄膜FeO/Pt(111). FeO/Pt(111) 结构在温和的 H2 还原气氛中 (600 K) 转变成表面 Fe 结构, 进一步的还原处理 (800 K) 则可以重新生成 Pt/Fe/Pt(111). 控制样品的环境气氛在 O2 和 H2 之间切换, 使得表面 Fe (FeO) 和次表面 Fe 可以重复地转变. 本研究实现了多种 Fe-Pt 表面结构的可控制备, 可为合理地设计高效、价廉的催化剂提供借鉴.     

Pt-Ni/γ-Al2O3 双金属催化剂上1,3-环己二烯的低温加氢和脱氢反应

 采用等体积浸渍法制备了 γ-Al2O3 负载的 Pt 和/或 Ni 双金属催化剂或单金属催化剂, 测定了它们的 CO 化学吸附量, 并在原位红外间歇反应装置上评价了其催化 1,3-环己二烯 (1,3-CHD) 的低温 (308 K) 加氢和脱氢性能. 结果表明, Pt-Ni/γ-Al2O3 催化剂性能优于 Pt/γ-Al2O3 或 Ni/γ-Al2O3. 结合密度泛函理论计算的不同催化剂上 1,3-CHD 的表面吸附能, 验证了具有较弱环烯烃吸附能的双金属催化剂加氢活性较高.     

NO在Ag/Pt(110)-(1×2)双金属表面的吸附：亚硝酸盐/硝酸盐表面物种的生成

以俄歇电子能谱、X射线光电子能谱和热脱附谱研究了室温下NO在Ag/Pt(110)-(1×2)双金属表面的吸附. 在该双金属表面上观察到了可能的亚硝酸盐/硝酸盐表面物种,其在更高温度下分解生成N₂. 然而,室温下NO在清洁Pt(110)表面和Ag-Pt合金表面上并不会生成这种亚硝酸盐/硝酸盐表面物种. 亚硝酸盐/硝酸盐表面物种的形成归因于高度配位不饱和Ag粒子的高活性及其与Pt基底之间的协同作用.     

激光剥蚀-电感耦合等离子体质谱测定植物样品中的元素

采用193 nm准分子激光剥蚀-电感耦合等离子体质谱(LA-ICP-MS)对标准植物粉末样品(GBW07602-GBW07603灌木枝叶、GBW07604杨树叶、GBW07605茶叶、GBW08514烟草)中13种元素(Li,B,Na,Mg,Al,K,Ca,Cr,Mn,Fe,Ni,Cu,Ba)进行定量测试.向植物粉末样...     

XPS analysis of bio‐organic systems

A survey of the literature is made for the XPS analysis of food products (mainly spray‐dried powders, which reveal a considerable surface enrichment in lipids) and of microorganisms and related systems (extracellular polymer substances and biofilms). This survey is used as a background for discussions and recommendations regarding methodology. Sample preparation methods reviewed are freeze drying, analysis of frozen hydrated specimens and adsorption of surface‐active biocompounds on model substrates. Peak decomposition is a way to increase the wealth of information provided by the XPS spectra. It should be performed after a check that sample charge stabilization is satisfactory. Moreover, ensuring the precision needed to make comparisons within sets of samples may involve a trade‐off between imposing constraints and generating information. The examination of correlations between spectral data in the light of chemical guidelines is useful to validate or improve peak decomposition and component assignment, and may also upgrade the chemical information regarding speciation. Further upgrading may be achieved by expressing marker XPS data in terms of concentrations of compounds of interest. Different methods of computation are discussed, providing a composition in terms of ingredients, classes of biochemical compounds, or various organic and inorganic compounds. As an alternative or complement to this deterministic approach, multivariate analysis of suitable spectral windows provides spectral components, which may be used for comparing samples, and which may have a direct chemical relevance or be used to identify features of interest. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of Powder Beds by Thermal Conductivity: Effect of Gas Pressure on the Thermal Resistance of Particle Contact Points

The thermal conductivity of ceramic powder packed beds was measured at temperatures below 100 °C for various powder sizes and compositions and under different gas atmospheres. Measurements at low pressures (down to 10 Pa) combined with a theoretical model allowed the elucidation of geometrical and thermal resistance parameters for the contact points between granules. The gap thickness and contact point size were found to be well correlated with the mean particle size. The thermal conductivities of all powders at low pressure were found to differ at most by a factor of two, whereas the solid‐phase conductivities of the powder materials differed by more than one order of magnitude. A theoretical model accounting for the size‐dependence of contact point conductivity is incorporated to rationalize this trend.     

METHODS FOR DUSTINESS ESTIMATION OF INDUSTRIAL POWDERS

Handling industrial powders leads to dust emissions. These emissions tend to generate human diseases or cause other environmental effects. A multitude of apparatus has been developed to estimate this dustiness behaviour of powders. Two of these well-known methods are presented and compared with each other. A third recently developed method is also introduced.